Flame Retandant Cases
Flame Retardant Cases
Cool under pressure
What Is Flame Retardant
Cases used for electronic instrumentation and storage are often required to resist fire or even extinguish flames. Steel cases are certainly fire resistant, but do not offer any insulation from heat. Aluminum is not allowed by some standards, because it can burn at high temperature. Containers made from consumer grade plastics can also burn quite vigorously. Fortunately, there are additives that can be blended into industrial grade plastics that either retard or extinguish flames. This technology has made it possible to make high tech plastic protective clothing for firemen and containers for use in all types of hazardous locations.
UL94 is one of the primary standards for testing the flammability of plastic materials used for parts in devices and appliances. It is now harmonized with IEC 60707, 60695-11-10 and 60695-11-20 as well as ISO 9772 and 9773. Standard size plaques of material are tested for how they respond to a small open flame or radiant heat. The results of the testing should only be used as an indicator of performance in real world situations. Other specific testing may also be required.
HB - Slow burning on a horizontal specimen; burning rate < 76 mm/min for thickness < 3 mm or burning stops before 100 mm
V-2 - Burning stops within 30 seconds on a vertical specimen; drips of flaming particles are allowed.
V-1 - Burning stops within 30 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.
V-0 - Burning stops within 10 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.
5VB - Burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may develop a hole.
5VA - Burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may not develop a hole.
FLAME RETARDANT (FR) MATERIALS
There are a number of materials which can be blended into the basic plastic resins used to mold cases. They include minerals, organohalogen and organophosphorous compounds and some other miscellaneous organic compounds. Many cannot be used due the requirements of environment standards such as California Prop 65, REACH and RoHS.These additives react in different ways. Some undergo a reaction which lowers the temperature of the plastic and thus reducing the heat source. Another technique is to actually induce a char of the surface of the plastic, thus separating it from the flame. Others give off inert gases that dilute the combustible gases and lower the flame. Chlorinated and brominated flame retardants release gases which react with the burning gasses to reduce or extinguish the flame. At UK our basic plastic resins are all rated UL94 HB. On special request we can mold an ABS material which is rated UL94 V-0. We use only materials which meet environmental standards for the location where the product is sold and used. Please let use know about your particular requirement and we will find a solution.